SYNDICATE A2 WATERSKI
The Syndicate A1 evolved, its design refined over two seasons of professional and amateur tournament domination. The Syndicate A2 employs all new Variable Concave Technology providing maximum speed and angle with safety to match. Traditional skis use one concave radius along their entire length. With the A2 this concave radius changes: larger radius and shallower concave depth in the tail for increased speed, smaller radius and deeper concave depth under the boots for maximum angle creation and back to a larger radius in the tip to keep the front of the ski up and moving without excess tip bite. Larger radii create lift fore and aft of the boot region and act as an Auto-Centering safety for the skier. When too far back at the finish of the turn, the increased tail lift helps to drive the ski tip down thereby allowing the skier to accelerate sooner off the buoy and stay in the pass. When the skier climbs over the front of the ski at the finish of the turn increased tip lift allows the ski to continue to move through the finish of the turn without stopping or overturning due to excess tip bite. Feel the difference on the water and ride what champions ride.
ATTACK BINDINGS
As water ski boots have transitioned from rubber
binders to textile footwear great improvements have been made in ease of
entry and overall boot comfort, but has performance been sacrificed?
Not any more. Meet the all new 2012 Attack boots! The Attack utilizes a
Unibody Construction and a 1Piece 3D molded tongue to
deliver unmatched lateral ski edging power. Traditional "Stitch to”
boots are made of a liner inside of a synthetic leather shell. Because
the liner and textile shell are not connected there is a large amount of
sheering between the two and the lateral support of the boot is much
lower than desired. Unibody construction mechanically attaches the soft
comfortable liner with the powerful textile shell to eliminate shearing
and maximize lateral support and edge power. The Attack also utilizes
the 1Piece 3D molded tongue to provide positive feedback to forward ankle flexion allowing the skier to let the Attack boot support them shifting their weight forward on the ski for more efficient skiing. Combine this with the industry’s only Baseless Aluminum Frame, ultra lean, water ski specific design, and you have marriage of finesse and power seen in no other hybrid boot on the market.
SKI FEATURES
- Bob LaPoint Design
- Variable Concave Design
- 5-Stage Rockerline
- Fat Tail Geometry
- 100% Carbon Fiber Reinforcements
- Torsional Carbon Construction
- Polyvinyl Chloride Foam Core
- Syndicate Adjustable Fin Block
- Handmade in the U.S.A.
Syndicate A2 Factory Settings
Ski Size
|
64.5"
|
65.5"
|
66.5"
|
67.5"
|
Fin Length (Tips)
|
6.845 in.
|
6.845 in.
|
6.845 in.
|
6.845 in.
|
Fin Depth
|
2.470 in. |
2.480 in. |
2.500 in.
|
2.505 in.
|
Distance From Tail
|
0.730 in.
|
0.750 in
|
0.780 in.
|
0.790 in.
|
Wing Angle
|
8 degrees
|
8 degrees |
8 degrees |
8 degrees |
Boot Location
|
28.5 in.
|
29 in.
|
29.5 in.
|
30 in.
|
*Boot Location (Front Binding) is measured from the tail of the ski to the heel of the front boot.
**Distance from Tail is the measurement from the tail of the ski to the back of the fin.
BINDING FEATURES
- Unibody Composite Construction
- Baseless Aluminum Frame
- Stiff Flex 3-D Molded Tongue
- Thin Orthotic Footbed
- Dual Lace Zones
Please be the first to review this product.
Write A Review
SKI SIZING:
64.5 in. = 90 - 130 lbs.
65.5 in. = 120 - 160 lbs.
66.5 in. = 150 - 190 lbs.
67.5 in. = 180 - 230 lbs.
BOOT SIZING:
Mens Size 4-9 | Womens Size 5-10
Mens Size 7-11 | Womens Size 8-12
Mens Size 10-14 | Womens Size 11-15
Shipping Rates for this Product:
3-Day Shipping – FREE
2-Day Shipping – $20
Overnight Shipping – $50
Saturday Delivery – Call for Info
International Shipping – N/A
Return Info for this Product:
This product can be returned within 30 days for any reason as long as it does not have excessive wear or damage.
Returns on this product are available for refund or product exchange.
